Tricks for showcasing your photography at home

//Tricks for showcasing your photography at home

Displaying Art or Photography at home can be tricky, especially when it comes to light. Here is some advice on properly lighting your artwork.

Reflection and glare are often problems with artwork that has been placed behind glass. Nonreflective glass and proper placement of lighting can help solve these problems.

The options for lighting a piece of art depend on how the piece is framed.

A piece of art or wall sculpture that does not have a frame can be illuminated with lighting not attached to the artwork, such as a mantel light, spotlight, track light or recessed light.

Small frames cannot support an attached picture light. Light them as described above, with a fixture that is not attached to the artwork.

A substantial frame can support the weight of an attached picture light. When choosing a picture light, consider the frame’s width and depth.

Types of Light

LED Lights: LED lights are best for showcasing valuable artwork. They don’t give off heat, do not emit damaging ultraviolet rays or infrared light. LEDs cost more upfront, but they have a long lifespan and are energy efficient.

Incandescent Lights: Standard incandescent light bulbs create a warm color that brings out the yellows and reds in art while flattering the blues and greens.

Halogen Lights: Halogens cast the purest white light, making them ideal for illuminating most art. They do generate a lot of heat, however, and must be placed far enough away that the heat doesn’t affect the artwork. If you are going to use halogen, consider placing a UV filter over the bulb.

Fluorescent Lights: Fluorescent lighting distorts the color of artwork, and the high level of ultraviolet rays emitted by fluorescent lights damages works of art by causing accelerated fading. Fluorescents are not recommended for lighting artwork.

Avoid putting artwork in direct sunlight, the ultraviolet rays can cause fading and discoloration.

Fixture Styles

Picture lights hang directly over a painting or are attached to the frame. A traditional picture light is about three inches in diameter and complements the classic and traditional artwork.

A slimline picture light is smaller than a traditional picture light, about one inch in diameter, and fits well with more contemporary pieces.

Picture lights are available in a variety of styles and finishes and come in lengths ranging from 12 to 48 inches. Both traditional and slimline picture lights use incandescent lightbulbs, and some are battery-powered.

Mantel lights and spotlights are placed in front of the artwork and usually sit on a mantel or a shelf. They light the artwork from the bottom and are less noticeable than a picture light.

Track lighting is the most flexible way to light art. A track can hold several lights. Track lighting can be used to light a wall evenly from floor to ceiling or to accent one or more pieces of art.

Recessed lights lie flush with the ceiling and are very subtle, but they have a limited range of movement. Recessed lighting is commonly found in newer homes, installed when the homes are built.

Position and Intensity of the Light

Reduce Glare: Place the light at a 30-degree angle to the work of art to minimize glare. Add 5 degrees to the angle for a larger frame, to avoid casting a shadow.

Avoid Heat Damage: Place lights far enough away from a photo to avoid possible heat damage. Heat can crack certain papers or canvas materials. Take special care when using hot halogen lights. To test the heat from your lights, put your hand between the art and the light source. If you can feel the heat from the light, it could potentially damage a photograph.

Intensity: The general rule for accenting a piece of art is to light it three times brighter than the rest of the room.

The Use of Existing Lights

Most homes are designed with some recessed lights built in – usually over high-visibility areas such as a fireplace. If recessed lights are not adequately lighting your photography, you may be able to solve the problem simply by adjusting the angle of the light or changing the bulb in order to achieve the desired effect.

Installing Lights

Installing a picture light is a simple procedure, easily accomplished by a homeowner. Track-light installation is a job best suited to a professional, but once the lighting is installed, it’s easy for a homeowner to change track heads and the direction of the lights.

No comments yet.

Leave a comment

Your email address will not be published.